|
|
The
latest
pictures
are at the top of the page.
Click on each image for a closer look
|
|
|
|
Once I had started
the detailed track design for the fiddle yard, I decided that my
original idea of a work top that covered the whole bench work
was not going to work as I would not be able to easily route the
wiring or access relays etc easily for other than the bottom
level. Plan "B" was born, remove the bench work covering.
|
|
|
|
2005/09/15 -
Fiddle yard, East looking West
|
|
|
|
2005/09/15 -
Fiddle yard, West looking East
|
|
|
|
2005/09/15 - Under
the shelf is the work to be done!
Just in case you can not remember the wire sizes and colours,look at this
spreadsheet.
|
|
|
|
2005/09/06 - Shelf
for the electronics (and junk) showing the start of the wiring
for the second batch!
|
|
|
|
2005/09/15 - The
finished wiring for the first 8 sets of points and blocks. Still
to be wired is the feedback, the power and signal to drive the
points and blocks and the AC power to drive the point motors.
|
|
|
|
2005/09/06 - The
finished wiring, unfortunately it is only the 5 out of about 40
set of points!!
|
|
|
|
22005/09/06 - The
dangly bits! Some of the wires before they are connected
|
|
|